Did you lose your Cignal remote control after drinking too much beer last night? Or you let your kids play it? Worry not! Nope I won't give you a new one! Buy a replacement at your nearest Cignal authorized dealer.
So now you have it? Follow the not so simple instruction below to set it up
1. First thing first. Turn off your STB. Yep the Cignal box.
2. Unplug and then plug again.
3. Wait for the box to boot up
4. On your newly purchased remote, press and hold OK button and Power button simultaneously until the LED in the remote control blinks 2x
5. Press 9-8-2 on the remote to unlock it for RCU programming, LED should blink 4x
6. Press and hold the OK button and Power button again simultaneously for 3-5 seconds until the LED blinks 2x
7. Press the assigned code set according to the STB Model to be controlled (refer to STB CODE SETS below)
| STB Model | Number Code |
|---|---|
 |
3070 |
 |
3158 |
 |
2319 |
 |
2792 |
 |
4998/2319 |
 |
2865 |
 |
2865 |
 |
2865 |
 |
2865 |
 |
5100/2792 |
8. The Remote control LED will blink 2x once correct code is entered
9. Press and hold the OK button and Power button simultaneously for 3-5 seconds until the LED blinks 2x
10. Press 9-8-2 on the remote to lock it for RCU programming, LED should blink 2x
11. Enjoy using your new Remote Control. Take care of it!
Comments
Post a Comment